License Plate Bracket Holder Repair









|
|
Latchmarker
Zip-Zip.
. . . and you're done!
Pure and simple . . . this
will save you time and money.
-
It is inexpensive, under $8.00 per fix.
-
It is fast and easy, installation in under 2 minutes.
- Every Used Car operation, large or small, needs this.
|
 |
|
 |
|
 |
|
Note damaged license plate bracket screw on left |
|
Zip-Zip. installed in 45 seconds |
|
Done for $8.00! |
EASY INSTALLATION
The beauty of Zip-Zip is the ease of installation. The product fits almost every model car and is mounted with two special self-drilling screws . . . Zip-Zip...
it is that quick! We recommend the use of a cordless drill/driver with a 10mm magnetic nut driver (available below) for the fastest
possible installation.
What If?
Why Buy This?
A Quality Product
Mounting Options
Testimonials
How Do I Order?
If you have been in the used car business for any period of time, you have seen this scenario:
-
A car comes in and the license plate screws are corroded so bad that they are either broken-off or the head is rounded off
and you can not get it out. On some cars, the plastic holders for the J-clips are sheared off so there is nothing to mount
the plate to! You say a few choice words and send the darn thing to the shop knowing you’ll have an hour’s worth of labor
charges coming AND the car is stuck at the shop for hours waiting to get worked on.
The facts are that the shop ticket averages $90 and the car is NOT where it can be sold...
It’s over on that service department’s lot for an average of four hours or more... it is dead inventory if it is not where you can sell it!
WHAT IF you can make the repair for under eight-bucks and you can have almost anyone fix it in under two minutes? You have cut your
cost to little of nothing and the beautiful car doesn’t even leave your lot and your control! Your car will love you, the sales people
will love you and your P&L will love you!
Back to top
WHY BUY THIS?
This patent pending product was developed for the Auto Industry by a man that has been in it for 27 years. I have seen the
problems again and again; I have seen salesmen and managers deal with
ticked-off customers
who have to wait
to get the
problem
fixed or have to
come back and wait
to get the
problem fixed. Any way you look at it, it ain’t good! Your
customer should be “down-the-road” enjoying their new car instead of thinking... “Well what else is there wrong?”
Fix the problem right from the start, as part of your recon process and you’ll have a happy customer, faster turns
(a little thing like this can sour a car) and a faster, more positive delivery process. Every one wins!
Back to top
A QUALITY PRODUCT
Reputation is based on performance. This product is specifically designed for commercial use. Zip-Zip brackets are
produced using high quality polypropylene that has been UV stabilized to maintain color and remain flexible in tough
conditions. All screws are specially treated with 700-hour salt spray tested coatings to resist corrosion. Special seals
help prevent corrosion.
Back to top
MOUNTING OPTIONS
 |
Standard Mounting
Align the ZIP ZIP Bracket as desired and mount using the two self-tapping screws(provided) through holes in both ends of bracket.
It is recommended that you use a drill/driver with a 10mm magnetic nut-driver or a 10mm socket. (DO NOT over tighten screws.)
Peel off backing on the two self-adhesive pads (provided) and place on vehicle approximately 4” below top of bracket.
(Clean the area where placing pads with rubbing alcohol, allow to dry thoroughly.)
Optional: The Short Cap inserts may be snapped into the two oval openings from the back side for a more “finished look” if desired.
Mount license plate by inserting two license plate screws (provided) through license plate and into bracket holes marked USA.
Option #2 Mounting
Align the ZIP ZIP Bracket as desired and mount using the two self-tapping screws (provided) through the two recessed holes in
the bracket. It is recommended that you use a drill/driver with a 10mm magnetic nut-driver or a 10mm socket. (DO NOT over tighten
screws.)
Peel off backing on the two self-adhesive pads (provided) and place on vehicle approximately 4” below top of bracket. (Clean the area
where placing pads with rubbing alcohol, allow to dry thoroughly.)
Optional: The Short Cap inserts may be smapped into the two oval openings from the back side for a more "finished look" if desired.
Mount license plate by inserting two license plate screws (provided) through license plate and into bracket holes marked USA.
Option #3 Mounting
If old license plate screws are still in place and cannot be removed, and provided there is sufficient vertical clearance
(this method will lower the license plate approximately 1-1/2 inches).
Rotate the bracket 180 degrees and insert the Tall Cap inserts from the back side. Mount bracket by using the two self-tapping
screws (provided) through holes in both ends of bracket or through recessed holes. It is recommended that you use a
drill/driver with a 10mm magnetic nut-driver or a 10mm socket. (DO NOT over tighten screws.) (Adjust location of self adhesive pads
as required.)
Mount license plate by inserting two license plate screws (provided) through license plate and into bracket holes marked USA.
Back to top
TESTIMONIALS
"Shear genius," "...best money I've ever spent," "...worth every penny,"
"...great idea, well executed," "...Thank you, fantastic product that does the job."
Back to top
HOW DO I ORDER?
- Email
or
FAX your Purchase Order
(Please include contact name and phone number. Subject to approval.)
OR
- Make quantity selection below by clicking on the corresponding Add To Cart button.
You will then be taken to PayPal to continue your transaction, or you can come back to make other purchases. To make a credit card payment,
you do not need a PayPal account.
| |
BEST BUY ! |
|
(1) bracket w/hardware pack
$9.99 each
USD
+ $4.00 Shipping and Handling*
|
Box of (10) brackets w/hardware packs
$79.99 box of ten USD
+ $8.00 Shipping and Handling* |
|
|
|
|
|
|
(1) 10mm Magnetic Nut Driver
$3.99 each USD
+ $1.00 Shipping and Handling*
|
|
|
|
|
|
*Normally shipped via USPS to the 48 contiguous state. Contact us for shipping beyond.
Don't forget to check out our YKK Latch Marker product as well!
License Plate Bracket Holder Repair
|
|