|
|
Attachment Instructions for YKK Brand ADX/ISO Marker Replacements
The repair requires a color matching cap and a white washer used to secure the cap.
-
Select the matching color
cap.
-
Slide the white plastic
washer under the surface of the seat material and align the hole in
the washer with the existing hole in the seat material. Note that
the washer has a smooth side and a textured side; position the
textured side toward the seat cover.
-
*Optional - On thinner
upholstery, a small white felt washer may be needed to ensure a
tight fit. This is included with the kit. If used, this would be
placed over the pin on the colored cap before moving on to Step 4.
-
Place the colored cap over
the hole on the top of the surface of the seat material and aligning
the logo in an upright position, then press the pin on the underside
of the cap through the top surface of the material and through the
white plastic washer, firmly locking into place. In tight
situations, the assembly may be snapped together by using a suitable
pair of pliers with a protective pad (a small piece of material,
rubber, leather, etc. to prevent damage to the colored cap).
|
|
 |
